devices.esphome.io

Martin Jerry US-SS01

Martin Jerry US-SS01

Device Type: switch
Electrical Standard: us

Amazon Link

Device on Martin Jerry

There are two versions of this switch. The older one had an esp8285 MCU. The newer one has a Tuya WB2S.

GPIO Pinout

ESP PinWB2S PinFunction
GPIO3P10button
GPIO5PWM2relay
GPIO12PWM4red LED
GPIO14PWM5blue LED

Basic Configuration

ESP8285 version

esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}


substitutions:
  device_name: martin-jerry-ss01
  friendly_name: Martin Jerry SS01


esp8266:
  board: esp8285


# Enable logging
logger:


# Enable Home Assistant API
api:
  encryption:
    key:


ota:
  password:


wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:
    ssid: ${friendly_name}_AP
    password: !secret wifi_password


captive_portal:


switch:
  # relay output
  - platform: gpio
    id: relay
    name: Relay
    pin: GPIO05


    on_turn_on:
      - switch.turn_on: blue_led
      - switch.turn_off: red_led


    on_turn_off:
      - switch.turn_on: blue_led
      - switch.turn_on: red_led


  - platform: gpio
    pin: GPIO12
    id: red_led
    name: Red LED
    inverted: true


  - platform: gpio
    pin: GPIO14
    id: blue_led
    name: Blue LED
    inverted: true


binary_sensor:
  - platform: gpio
    pin:
      number: GPIO03
      mode: INPUT_PULLUP
      inverted: true
    name: Main Button
    on_press:
      - switch.toggle: relay


button:
  - platform: restart
    id: restart_button
    name: Restart
    entity_category: diagnostic

WB2S version

esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}


substitutions:
  device_name: martin-jerry-ss01
  friendly_name: Martin Jerry SS01


bk72xx:
  board: wb2s


# Enable logging
logger:


# Enable Home Assistant API
api:
  encryption:
    key:


ota:
  password:


wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:
    ssid: ${friendly_name}_AP
    password: !secret wifi_password


captive_portal:


switch:
  # relay output
  - platform: gpio
    id: relay
    name: Relay
    pin: PWM2


    on_turn_on:
      - switch.turn_on: blue_led
      - switch.turn_off: red_led


    on_turn_off:
      - switch.turn_on: blue_led
      - switch.turn_on: red_led


  - platform: gpio
    pin: PWM4
    id: red_led
    name: Red LED
    inverted: true


  - platform: gpio
    pin: PWM5
    id: blue_led
    name: Blue LED
    inverted: true


binary_sensor:
  - platform: gpio
    pin:
      number: P10
      mode: INPUT_PULLUP
      inverted: true
    name: Main Button
    on_press:
      - switch.toggle: relay


button:
  - platform: restart
    id: restart_button
    name: Restart
    entity_category: diagnostic
Edit this page on GitHub

On this page